LED Scene Controller II KEYPAD only
$25.00
All LSC II boards now have adapter pins to accept the LSSC II keypad which can be used for programming the LSC II with a DCC system
All LSC II boards have adapter pins to accept the LSC II keypad which can be used for programming the LSC II without a DCC system. 100 preconfigured animations are built into the LSC II and the keypad unlocks those. Once you program the LSC II you can remove the keypad and install the LSC II on your layout. the keypad can be used over and over on any LSC II board that has the adapter pins.
Picture of keypad and keypad installed on LSC II with JST Plugs
Related products
- Building Lighting
LED Scene Controller II with Keypad & 100 pre-configured animations.
$120.0016 Port LED controller can power and animate up to 64 LEDs. Power, controller and Animate your LED lights that have JST-style plugs.
- Building Lighting
LED Micro Scene Controller Board (Solder Holes)
$59.00This DCC Controller board has 16 individually controllable pins for lighting LED “chips” and other LED components to light buildings, cars – anything.
- Building Lighting
LED Scene Controller MICRO – 16 LED Test Board 4 COLOR
$10.00This is the same as the other LED test board except this board has FOUR different color LEDs: 2k,3k,5k and 6.5k. Use this TEST board to help program the LSC before it is installed. No soldering needed.
- Building Lighting
JST wire (24″) with open leads (16 per pack)
$32.00These wires 24″ long with the JST connector plug into the LED Scene Controller II. They can be used to connect your own LED purchase separately or your can solder on our LED chips.
