G Scale Crossing Flasher Kit (Battery Powered)

$124.00$294.00

Clear
N/A ,

Click here for the Introduction Video

The G Scale Crossing Flasher kit (Battery) allows you put signaling on your layout in seconds.  We recommend using the rubber mounting blocks even if you plan to install into the ground.

We pioneered the use of a non infrared style sensor which we call a Precision Sensor.  The sensor has a 1mm precision on range detection and will work in direct sunlight or pitch dark.  You can manually or automatically (Auto Ranging) set the detect distance.  Then you can choose what type of aspects you want to display.

The Sensor has a variable Timeout adjustment.  That means you can delay the start of the light aspect changing from zero to up to 60 seconds after the train has cleared the sensor.

The G-Controller allows you to adjust the speed by flasher flash and you can adjust the brightness of the lights.

Kit Includes:

  1. Choice of Flasher ( 2 Light or 4 Light)
  2. G Signal Controller with built in MAX Sensor ( Outdoor/Indoor Use)
  3. Electrical Box with exterior light
  4. Mounting Magnets and installation Template
  5. 5000 mAh LIPO Battery

A SPECIFIC LIPO battery must be used.  You will need at least one charger.

** Lithium batteries must be shipped by UPS ground – therefore the entire order must ship by ground.  

** Each Kit weights about 5 to 6 pounds and must be shipped separately.  If you want more than one, you must place a separate order for each

OPTIONS:

2 (4″ x 4″) Heavy Weight Rubber Mounting Block; holes drilled with Resin Feet ($10)

or

1  (4″ x 6″) Heavy Weight Rubber Mounting Block; holes drilled with Resin Feet ($20)

4″ x 4″ x 1″ Rubber Mounting Block ($10 each)

EBL LIPO Battery Charger ($50):

 

Weight 32 oz
Flasher

2 Light, 4 Light

Charger

With Charger, Without Charger

Rubber Mounting Blocks

(2) 4×4" Blocks, (1) 4×6"Block, No Blocks

Shopping cart

close